close
+86-573-87805539
sales@truemaxengg.com
Search
HangZhou Truemax Machinery & Equipment Co.,Ltd.
PB51AT-4R-E

PB51AT-4R-E Hydraulic Concrete Placing Boom

PB51AT-4R-E
Lattice Tower concrete placing boom PB51AT-4R-E with the placing boom upper part, combine the function of tower and placing boom. Accompany rise of building, the placing boom can increase the mast section by the own climbing mechanism. When the height is exceed free standing height, the placing boom will attached to the wall of building.  

PB51AT4RE was the first placer boom which working range more than 50m in China(the biggest arm in domestic), suitable for large construction projects, nuclear power project, grain, oil depots and other large projects, has won the praise and favor from customer, now applied to Malaysia MB builder project(Height:270m). As the representative concrete equipment of TRUEMAX, PB51AT4RE fully reflects advantage of Lattice Tower concrete placing boom. 

Features of Hydraulic Concrete Placing Boom

  1. Combine the function of tower and placing boom: With the rise of the building, the placing boom can increase the standard section by the own climbing frame. When the height is more the stationery height, the placing boom will be attached to the wall.

  2. The main electronic components are purchased from the world-famous brand such as Scheider and Omron which make stable and reliable quality.

  3. Equipped with the lifting mechanism, it can lift mast section when climbing.

  4. Four arms design. The machine is fully driven by hydraulic and slew flexibly, with wide working range. Arms adopt high strength steel plate which is stronger and lighter.

  5. Two modes of operation: wireless remote control and cable remote control, easy to operate.

  6. Flexible and quick up set-up: adopting electric-hydraulic proportional control to guarantee the placing boom more stable and the speed is adjustable. our arms design. The machine is fully driven by hydraulic and slew flexibly, with wide working range. Arms adopt high strength steel plate which is stronger and lighter. Each column has universal interchangeability. When adding or reducing columns, it is more convenient to increase or decrease the conveying pipe and ladder.

  7. Humanization design: Intergrated design for pump station and electric control cabinet which installed in the lower support, which is easy for installatioin and also reduce failure rate. The column has an octagonal cross section, lighter weight and greater bearing capacity. Each column has universal interchangeability. When adding or reducing columns, it is more convenient to increase or decrease the conveying pipe and ladder.

Technical Specifications

MODEL

PB51AT-4R-E

Performance

Max Radius of Placing Boom (m)

51

Free Standing Height(To The Joint Between The End of The Boom And Slewing Platform)(m)

52

Slewing Range

360°

Working Temperature(℃)

 -20~48

Power(Subject to Customer)

380V/50Hz

Boom

Delivery Pipeline Diameter(mm*mm)

φ133*4.5

Delivery Hose Diameter("*mm)

5"*3000

1st Section

Length(m)

21.5

Articulation

0°~86°

2nd Section

Length(m)

9.8

Articulation

0°~180°

3rd Section

Length(m)

9.8

Articulation

0°~180°

4th Section

Length(m)

9.9

Articulation

0°~180°

Type of Hydraulic Oil

Circumstance Temperature 5℃-48℃

ESSO NUTO H46

Circumstance Temperature -20℃-5℃

ESSO NUTO H32

Motor

power(KW)

30

  Hydraulic Pressure (Mpa)

30

  Mode of Slewing

Gear Slewing

  Mode of Climbing

Hydraulic Cylinder Climbing

  Mode of Control

1.Radio Remote Control
2.Cable Remote Control

  Delivery pipe dimension(mm)

DN125


Main configuration
1. Max radius:38m
1.1Pc 1.6*1.6*1.5m Inner Climbing Section + 11Pc 1.6*1.6*3m Mast Section
2.Italian Autec Remote Control
3.With Blance Arm
4.Shaft Frame Climbing System
5.Free Standing Height:37m
Leave a Message Email Us

we will contact you within 24 hours.

Related Products

Concrete Machinery Projects